Our factory-trained, certified technicians service all of our products, including (but not limited to): Evinrude, Johnson, and Honda outboards; OMC Cobra, Mercruiser, and Volvo sterndrives; and Sea Doo personal watercraft. We also offer installation of electronics for your added convenience. Please call us to schedule an appointment at 610-434-7400. | BE WISE...WINTERIZE! Standard Winterization 1) Run a fogging solution through the boat engine while it is running to protect internal parts
2) Spray a protective anti-corrosion film on the external parts of engine
3) Drain the engine block and manifolds and fill the engine with anti-freeze (stern drives only)
4) Drain the lower unit gear oil and refill with fresh oil
5) Grease all external fillings on stern drives
6) Disconnect the battery/batteries and store somewhere warm
7) Cover your boat Optional Winterization 1) Remove spark plugs and spray oil on cylinders,
then replace spark plugs
2) Change engine oil and filter
3) Remove prop and grease prop shaft
4) Add fuel stabilizer to prevent condensation in gas tank (run engine briefly to flush stabilized gas through fuel injectors and carburetor)
5) Winterize fresh water system
6) Remove outdrive and grease U-Joint **this may or may not include all that you need to do to winterize your boat/engine...please refer to your owner's manual for more details** |
|